Premium 24 Volt 2835 Corolux Series LED Light Strip, Single Color (UL-Listed) : 32 Feet [IP-30]

32 Feet 2835 Premium Strip Light - for High-End Lighting Homes, Kitchens, Cabinets, Displays, Bedrooms, Crown Molding & More.

Powerful lighting at 285 Lumens per foot. You will achieve longer strip runs with evenly spread out lighting and no voltage drop.

Our Corolux series Premium UL-Listed 2835 LED Light Strips are the brightest strips we stock and can be mounted directly on most surfaces to provide professional-quality lighting effects. They operate on 24V DC power and can be used with a variety of dimmers, switches, connectors, and other low-voltage accessories to accomplish a wide variety of lighting tasks. Not only are our 2835 LED Light Strips simple to install, but they can last for years with minimal power requirements.

• Product Features: Soft White, Warm White, Neutral White, Cold White, or Cool White, 2700K, 3000K, 4100K, 5000K or 6500K
• Can be cut and reconnected every 8 LEDs
• Dimmable with HitLights LED Dimmable Driver or EZDim
• IP-30 (Indoor)
• 6 Year Warranty
• 32 feet / 2.3 watts per foot /
• 10mm /
• 285 lumens per foot

Installation Instructions :

• Clean the surface you intend to stick the light strip to
• Remove the backing strip from the adhesive tape 
• Press and hold the light strip firmly against the surface
• Plug your light strip into a compatible 24V DC power supply or dimmer
• Connect your power supply to a wall outlet 
• Enjoy your beautiful LED light strip!

• Input : 24V DC
• Output: 285 Lumens per Foot
• Color Temperature: 2700K, 3000K, 4100K, 5000K or 6500K
• Power Requirements: 2.3 Watts per Foot
• Strip width : 10 mm
• Certification: UL-Listed This Single Color Strip operates on 24V DC.

This strip is cuttable and connectable. You can cut it with scissors every  8 LEDs, and connect it with wire and solder - or with our solderless connectors.

This strip is dimmable

You can connect a low voltage dimmer between it and your power supply - or you can use a dimmable power supply and a high voltage dimmer switch installed before the dimmable power supply. An EZDim dimmer switch has a built-in dimmable power supply - and is a very easy install.

This strip is easy to install.

It comes with adhesive backing tape. For difficult installations, particularly if you're installing it upside down or outdoors, you might require our heavy duty mounting tape or aluminum channels.