L1012V-302-1630

Standard Luma10 (5050) LED Light Strip, Single Color 16.4 Feet - High Density [IP-20]

$16.97 $17.99 You Save 5% ($1.02)

Product Features :
• Warm White or Cool White (3000 or 6500K)
• Can be cut and reconnected every three LEDs
• Comes with our new HIT blue mounting tape - twice as strong as before!
• Dimmable with HitLights LED Dimmable Driver or Switchex
• IP-20 (Indoor)
• 1 Year Warranty

Category: 10mm, 12-volt, color-cool-white, color-warm-white, DC-Jack, dimmable, Luma10, single-color, weatherproof

Description
Installation
Specifications
Product FAQs

16.4 Feet of Adhesive Backed 5050 LED Light Strip - for Kitchens, Cabinets, Displays, Bedrooms, Crown Molding & More. 218 Lumens per foot

Our 5050 LED Light Strips are thin and discreet lighting products that can be mounted directly on most surfaces to provide professional-quality lighting effects. Our strips operate on 12V DC power, and can be used with a variety of dimmers, switches, connectors, and other low-voltage accessories to accomplish a wide variety of lighting tasks. Not only are our LED Light Strips simple to install, but they can last for years with minimal power requirements

Our light strips are also cuttable and connectable with extension cables
Installation Instructions :

• Clean the surface you intend to stick the light strip to
• Remove the backing strip from the adhesive tape
• Press and hold the light strip firmly against the surface
• Plug your light strip into a compatible 12V DC power supply or dimmer
• Connect your power supply to a wall outlet
• Enjoy your beautiful LED light strip!
Specifications :

• Input : 12V DC
• Output : 218 Lumens per Foot
• Color Temperature : 3000K (Warm White) or 6500K (Cool White)
• Input : 12V DC
• Power Requirements : 3.4 Watts per Foot
• Strip Width : 10 mm
• LEDs : 300 per 16.4 foot roll

Spec Sheet - Warm White
Spec Sheet - Cool White
This Single Color Strip operates on 12V DC.

To use it in your home or business you will need a power supply (sometimes called a transformer or driver) to convert your home's 110V AC power to 12V DC. The power supply you choose will need to be rated above the total wattage of the strip you are using (see specifications tab for power requirements per foot of strip).

This strip is cuttable and connectable.

You can cut it with scissors every three LEDs, and connect it with wire and solder - or with our solderless connectors.

This strip is dimmable.

You can connect a low voltage dimmer between it and your power supply - or you can use a dimmable power supply and a high voltage dimmer switch installed before the dimmable power supply. A Switchex dimmer switch has a built in dimmable power supply - and is a very easy insall.

This strip is easy to install.

It comes with with adhesive backing tape. For difficult installations, particularly if you're installing it upside down or outdoors, you might require our heavy duty mounting tape or aluminum channels.