My Cart

Close

T3 Multi Zone RGB Multicolor LED Light Strip Control System : Remote or Receiver

$59.97 $74.99

CTR-T3C

For large or complicated multi-zone LED light strip projects. Requires one T3 controller and one or more T3 receivers. 180 Watts per controller.

The HitLights T3 Multi Zone System is the ultimate custom control option for any RGB LED Light Strip project. By combining one controller with up to ten receivers, you have the ability to control every receiver together or individually - all in the palm of your hand. Additionally, with a range of 98 feet, the RF controller can do so from just about any room in your home, office or place of business. The T3 Multi Zone System also features a unique color wheel for your choice of custom colors. The T3 is an extravagant solution, and is not for everyone - but there is no question that if you choose the HitLights T3 Multi Zone System you will have the highest degree of control and customization available at your fingertips. We guarantee you will not be disappointed.

Each product is sold separately.

T3 Remote Control

Product Features :
• Up to 10 Zones of Control at your fingertips (individually, or all together)
• Easy to use color wheel feature
• 1 Year Warranty

Installation Instructions :
• Connect your 12V DC supply to the DC jack input or hardwire your power wires to the screw  terminals
• Connect your 12V DC RGB LED Light Strips to the 4-pin output, making sure to align the arrows
• Remove the plastic tab from the battery compartment of the remote.
• Your controller is ready to go!

Syncing Instructions :
• Press On/Off Key on T3 receiver for 3 seconds
• Press any 1-10 Key on your T3 controller within 5 seconds
• Your LEDs should flash briefly
• Your syncing process is complete!

Specifications :
• Input : 12V DC
• Output : 4 Wire RGB (Up to 180 Watts)
• Control : 2.4 GHz RF Wireless (Up to 98 Feet)
• Part Number : CTR-T3C

Download Spec Sheet

T3 Remote Receiver

Product Features :
• Up to 10 Zones of Control at your fingertips (individually, or all together)
• Easy to use color wheel feature
• 1 Year Warranty

Installation Instructions :
• Connect your 12V DC supply to the DC jack input or hardwire your power wires to the screw  terminals
• Connect your 12V DC RGB LED Light Strips to the 4-pin output, making sure to align the arrows
• Remove the plastic tab from the battery compartment of the remote.
• Your controller is ready to go!

Syncing Instructions :
• Press On/Off Key on T3 receiver for 3 seconds
• Press any 1-10 Key on your T3 controller within 5 seconds
• Your LEDs should flash briefly
• Your syncing process is complete!

Specifications :
• Input : 12V DC
• Output : 4 Wire RGB (Up to 180 Watts)
• Control : 2.4 GHz RF Wireless (Up to 98 Feet)
• Part Number : CTR-T3R

Download Spec Sheet