This 60 watt M-Series dimmable driver from HitLights is a magnetic, ETL Listed Class 2 power supply that converts 120V AC to regulated 24V DC for single-color 24V LED strip lights. It’s built for permanent indoor lighting such as under-cabinet, shelf, cove, and display runs where reliable wall-dimmer control is required.
The driver accepts 120VAC input (108–132VAC, 50/60 Hz) and provides 24V DC output up to 60 watts (2.5 amps) on a Class 2 low-voltage circuit. Power factor is about 0.93, with typical efficiency around 80 percent, and the magnetic design includes auto-reset protection on both primary and secondary to help guard against overloads and short circuits.
A metal enclosure measuring 57 × 166 × 65 mm (2-1/4 × 6-9/16 × 2-9/16 inches) is rated NEMA 3R for dry and damp locations and intended for indoor use. Bare wire connections on line, neutral, ground, and low-voltage outputs make hard-wiring straightforward in a junction box or cabinet cavity.
- Input: 120VAC (108–132VAC), 50/60 Hz
- Output: 24V DC, 60W (2.5A), Class 2 constant-voltage
- Dimming: 0–100% MLV TRIAC phase/forward dimming
- Protection: Auto-reset on primary and secondary circuits
- Environmental: NEMA 3R (dry and damp), indoor use
- Certifications & warranty: ETL Listed, Class 2, thermal class B 130°C, 6-year warranty
The driver is highly recommended for 24V LED strip lights and not compatible with COB or RGB strips, which require different control hardware. It works with many Lutron dimmers (Ariadni, Vareo, Nova, Ceana, Diva, Gyder, Lyneo, Nova T, Skylark) and Leviton dimmers (Mural, SureSlide, ToggleTouch, Vizia), giving installers flexibility to match existing control hardware.
WHAT'S INCLUDED:
FREQUENTLY ASKED QUESTIONS:
Q: What is the HitLights 60W M-Series 24V dimmable driver used for?
A: It is a 60 watt magnetic dimmable LED driver that converts 120V AC to 24V DC to power single-color 24V LED strip lights on indoor circuits. It’s intended for under-cabinet, shelf, display, and accent lighting that needs wall-dimmer control and Class 2 low-voltage power.
Q: Who should use this 24V 60W magnetic dimmable driver?
A: The driver is aimed at electricians, low-voltage contractors, lighting designers, and advanced DIYers looking for a compact, USA-assembled 24V supply for medium-length strip runs. The 60W rating fits projects where a single, mid-capacity driver is preferred over multiple small units.
Q: How does the M-Series driver work with wall dimmers?
A: The driver connects to 120VAC through a compatible magnetic low-voltage (MLV) TRIAC wall dimmer and outputs a dimmed 24V DC feed to the LED strips. It supports 0–100% phase/forward MLV dimming and is compatible with many Lutron dimmers (Ariadni, Vareo, Nova, Ceana, Diva, Gyder, Lyneo, Nova T, Skylark) and Leviton dimmers (Mural, SureSlide, ToggleTouch, Vizia).
Q: What are the key electrical and physical specifications?
A: Input is 120VAC (108–132VAC), 50/60 Hz, and output is 24V DC at up to 60 watts (2.5 amps) on a Class 2 circuit. The housing measures 57 × 166 × 65 mm (2-1/4 × 6-9/16 × 2-9/16 inches), with typical efficiency around 80 percent, power factor about 0.93, NEMA 3R rating for dry and damp locations, and thermal class B 130°C.
Q: How does this M-Series driver compare to non-dimmable or plug-in power supplies?
A: Non-dimmable adapters are not designed for phase-cut dimming and often flicker or shut off when used with wall dimmers. The M-Series driver is purpose-built for dimming, with 0–100% MLV TRIAC dimming, auto-reset protection, ETL Listed Class 2 output, and a six-year warranty for permanent 24V strip lighting installations.
Q: How do I connect this driver to my LED strip lights?
A: On the input side, connect black to live, white to neutral, and green to ground. On the low-voltage side, connect the red wire to the positive terminal and the blue wire to the negative terminal of the 24V LED strip, using an appropriate junction box or enclosure.
Q: Can this driver be used outdoors or with COB and RGB LED strips?
A: The driver is NEMA 3R rated for dry and damp environments and is intended for indoor use; waterproof drivers are recommended for outdoor applications. It is recommended for 24V LED strip lights only and is not compatible with COB or RGB strips, which require different driver or controller designs.
SHIPPING DETAILS:
