Skip to content
The EZDim® is an all-in-one dimmable LED driver and dimmer switch that provides both power and dimming control for low voltage LED lighting. It combines a dimmer switch and LED driver into a single unit that fits into a standard electrical box.
- Description
- Specification
- Applications
- Compatible Products
- FAQs
- Downloads
EZDim®: Combines an LED dimmer switch and low-voltage LED power supply into a single integrated unit. The EZDim Dimmer + Driver accepts 120 VAC and converts it to low-voltage DC, all within a standard electrical box. With power options up to 100W, it is a true evolutionary step forward for power and control of LED applications.
Product Features:
Simplifies your LED installation
Eliminates compatibility issues between drivers and switches
Superior LED dimming performance (100% – 10%)
Preset dimmer with on/off switch
Fits in a standard recessed electrical box
No minimum load
No derating required when ganging units
Power failure memory: If power is interrupted, EZDim will return to setting prior to interruption
Included face plates: Glossy White, Glossy Light Almond and Glossy Dark Brown
Warranty: 6 years
UL listed and class 2 for safety
Specifications:
Input Voltage: 120VAC (108 ~ 132VAC), 50/60Hz (47 ~ 63Hz)
Output Voltage: 12V DC, 60 Watts (5 Amps)
Dimension: 1.4 x 2.1 x 4.1 Inches
Power Factor: >0.9 @ 120VAC 60Hz max load
THD: ≤20% @ 120VAC 60Hz max load. Tested to comply in accordance with IEC 61000-3-2
Stand-by Power: ≤0.5W
Protections: Short circuit, thermal runway, and over voltage
Ambient Operating Temp: 0°C to 40°C
IP Rating: IP30 Dry Location
Certifications : FCC, UL Listed, Class 2
Connection Type: Hard-Wired
Efficiency: ≥91% @ 120VAC max load
In-Rush Current: Meets NEMA-410 requirement at any nominal input full sine wave voltage and maximum load at 25°C
Leakage Current: <500μA @ 120VAC
Surge/Transient: Tested to meet transients defined in IEC 6100-4-4, level 3 & IEC 6100-4-5, level 3
Dimming: Output voltage is adjustable via sliding lever
Humidity: 8 ~ 90% relative humidity, non-condensing
Warranty: 6 years
SKU
Input
Output
Wattage
Class 2
SWX-12V-040-30-U
120V AC
12V DC
40W
YES
SWX-12V-060-30-U
120V AC
12V DC
60W
YES
SWX-24V-060-30-U
120V AC
24V DC
60W
YES
SWX-24V-100-30-U
120V AC
24V DC
100W
YES
SWX-12V-040-30-U
Input: 120V AC
Output: 12V DC
Wattage: 40W
Class 2: YES
SWX-12V-060-30-U
Input: 120V AC
Output: 12V DC
Wattage: 60W
Class 2: YES
SWX-24V-060-30-U
Input: 120V AC
Output: 24V DC
Wattage: 60W
Class 2: YES
SWX-24V-100-30-U
Input: 120V AC
Output: 24V DC
Wattage: 100W
Class 2: YES
Living Room Lighting Control
Indoor Task Lighting Control
Under Cabinet Lighting Control
Indoor Stairs Lighting Control
Office Space Lighting Control
Store Lighting Control
Power & Control Your Luma5 HD
Can power 1 spool of this LED (42.64W)
Simplified Installation
No compatibility issues
Superior LED Dimming (0-100%)
Power & Control Your Luma20 HD
Slim and Stylish Design
Great for dissipating heat
Adds extra protection to the LED strip
Can be cut and retrofitted to required length
Extend and Connect Your Luma5
Install with a simple clasp attachment
Your solderless option in wiring & installation
Maximum current of 3 Amps.
Compatible with all single color SMD3528 and other 8mm strips
Power & Control Your Luma5 HD
Can power 1 spool of this LED (42.64W)
Simplified Installation
No compatibility issues
Superior LED Dimming (10-100%)
Power & Control Your Luma20 HD
Slim and Stylish Design
Great for dissipating heat
Adds extra protection to the LED strip
Can be cut and retrofitted to required length
Extend and Connect Your Luma5
Install with a simple clasp attachment
Your solderless option in wiring & installation
Maximum current of 3 Amps.
Compatible with all single color SMD3528 and other 8mm strips
What is the EZDim® Driver and Dimmer Switch?
What voltage does the EZDim® output?
The 12V version of the EZDim® outputs 12V DC power to run 12V LED lighting. There is also a 24V version available.
How much power does the 60W model provide?
The 60W EZDim® model provides up to 60 watts (5 amps) of 12V DC power to LED lighting. However, it is best to use up to 80% of the driver capacity only for longevity.
What types of faceplates are included?
The EZDim® comes with three interchangeable faceplates in glossy white, light almond, and glossy dark brown to match different decors. A wall plate is not included.
Can I put this be used outdoors?
No, since this is IP30 rated it is for indoor use only.
How long is the warranty?
The warranty of this unit is for 6 years.
Does the EZDim® require a neutral wire?
Yes, the EZDim® requires a neutral connection in addition to line and load wires. It will not work without a neutral.
What size electrical box does the EZDim® fit in?
The warranty of this unit The EZDim® is designed to fit into a single gang electrical box.for 6 years.
It the EZDim® dimmable?
Yes, the EZDim® allows you to dim your LED lighting from 100% down to 10% brightness. It uses PWM (pulse width modulation) dimming optimized for LED loads.
Is the EZDim® UL listed?
Yes, the EZDim® is UL listed and meets safety standards for use in the US and Canada.
