Skip to content
The EZDim® is an all-in-one dimmable LED driver and dimmer switch that provides both power and dimming control for low voltage LED lighting. It combines a dimmer switch and LED driver into a single unit that fits into a standard electrical box.
- Description
- Specification
- Applications
- Compatible Products
- FAQs
- Downloads
EZDim®: Combines an LED dimmer switch and low-voltage LED power supply into a single integrated unit. The EZDim Dimmer + Driver accepts 120 VAC and converts it to low-voltage DC, all within a standard electrical box. With power options up to 100W, it is a true evolutionary step forward for power and control of LED applications.
Product Features:
Simplifies your LED installation
Eliminates compatibility issues between drivers and switches
Superior LED dimming performance (100% – 10%)
Preset dimmer with on/off switch
Fits in a standard recessed electrical box
No minimum load
No derating required when ganging units
Power failure memory: If power is interrupted, EZDim will return to setting prior to interruption
Included face plates: Glossy White, Glossy Light Almond and Glossy Dark Brown
Warranty: 6 years
UL listed and class 2 for safety
Specifications:
Input Voltage: 120VAC (108 ~ 132VAC), 50/60Hz (47 ~ 63Hz)
Output Voltage: 24V DC, 60 Watts (2.5 Amps)
Dimension: 1.4 x 2.1 x 4.1 Inches
Power Factor: >0.9 @ 120VAC 60Hz max load.
THD: ≤20% @ 120VAC 60Hz max load. Tested to comply in accordance with IEC 61000-3-2
Stand-by Power: ≤0.5W
Protections: Short circuit, thermal runway, and over voltage
Ambient Operating Temp: 0°C to 40°C
IP Rating: IP30 Dry Location
Certifications : FCC, UL Listed, Class 2
Connection Type: Hard-Wired
Efficiency: ≥91% @ 120VAC max load
In-Rush Current: Meets NEMA-410 requirement at any nominal input full sine wave voltage and maximum load at 25°C
Leakage Current: <500μA @ 120VAC
Surge/Transient: Tested to meet transients defined in IEC 6100-4-4, level 3 & IEC 6100-4-5, level 3
Dimming: Output voltage is adjustable via sliding lever
Humidity: 8 ~ 90% relative humidity, non-condensing
Warranty: 6 years
SWX-12V-040-30-U
Input: 120V AC
Output: 12V DC
Wattage: 40W
Class 2: YES
SWX-12V-060-30-U
Input: 120V AC
Output: 12V DC
Wattage: 60W
Class 2: YES
SWX-24V-060-30-U
Input: 120V AC
Output: 24V DC
Wattage: 60W
Class 2: YES
SWX-24V-100-30-U
Input: 120V AC
Output: 24V DC
Wattage: 100W
Class 2: YES
SKU
Input
Output
Wattage
Class 2
SWX-12V-040-30-U
120V AC
12V DC
40W
YES
SWX-12V-060-30-U
120V AC
12V DC
60W
YES
SWX-24V-060-30-U
120V AC
24V DC
60W
YES
SWX-24V-100-30-U
120V AC
24V DC
100W
YES
Living Room Lighting Control
Indoor Task Lighting Control
Under Cabinet Lighting Control
Indoor Stairs Lighting Control
Office Space Lighting Control
Store Lighting Control
Power & Control Your COB Strip
Can power1 spool of this LED (49.98W)
Simplified Installation
No compatibility issues
Superior LED Dimming (0-100%)
Extend and Connect your LED Strip
Includes: 10 pack x 6 Inch Any Angle 2Pin 10mm Solderless LED Light Strip Connector
Solderless connection for LED strips
Install your LED strip with a
simple clasp attachment
Compatible with any 2-pin COB Strips, CSP Strips, 2835 LED Strips, 10mm LED/COB/CSP
Mount your LED Strip and Accessories
Holds up to 3lbs per square inch
Waterproof to withstand high temperature and water, perfect for indoor and outdoor use
Size : 32Ft x 0.4"
Power & Control Your COB Strip
Can power1 spool of this LED (49.98W)
Simplified Installation
No compatibility issues
Superior LED Dimming (10-100%)
Extend and Connect your LED Strip
Includes: 10 pack x 6 Inch Any Angle 2Pin 10mm Solderless LED Light Strip Connector
Solderless connection for LED strips
Install your LED strip with a
simple clasp attachment
Compatible with any 2-pin COB Strips, CSP Strips, 2835 LED Strips, 10mm LED/COB/CSP
Mount your LED Strip and Accessories
Holds up to 3lbs per square inch
Waterproof to withstand high temperature and water, perfect for indoor and outdoor use
Size : 32Ft x 0.4"
What is the EZDim® Driver and Dimmer Switch?
What voltage does the EZDim® output?
The 24V version of the EZDim® outputs 24V DC power to run 24V LED lighting. There is also a 12V version available.
How much power does the 60W model provide?
The 60W EZDim® model provides up to 60 watts (2.5 amps) of 24V DC power to LED lighting. However, it is best to use up to 80% of the driver capacity only for longevity.
What types of faceplates are included?
The EZDim® comes with three interchangeable faceplates in glossy white, light almond, and glossy dark brown to match different decors. A wall plate is not included.
Can I put this be used outdoors?
No, since this is IP30 rated it is for indoor use only.
How long is the warranty?
The warranty of this unit is for 6 years.
Does the EZDim® require a neutral wire?
Yes, the EZDim® requires a neutral connection in addition to line and load wires. It will not work without a neutral.
What size electrical box does the EZDim® fit in?
The warranty of this unit The EZDim® is designed to fit into a single gang electrical box.for 6 years.
It the EZDim® dimmable?
Yes, the EZDim® allows you to dim your LED lighting from 100% down to 10% brightness. It uses PWM (pulse width modulation) dimming optimized for LED loads.
Is the EZDim® UL listed?
Yes, the EZDim® is UL listed and meets safety standards for use in the US and Canada.
