Luma5 LED Strip Light Standard Density 16.4ft UL Listed IP30 Indoor

• 1 × HitLights Luma5 Single Color LED Strip, 16.4 ft (5 m), IP30, standard density
• 1 × Basic installation and safety guide

Q: What is the HitLights Luma5 single color LED strip used for?
A: It is a 16.4 ft single color LED light strip designed for indoor accent and task lighting. Typical uses include under-cabinet kitchen lighting, cove lighting, shelving, display cases, and backlighting artwork or signage. Standard density output provides a smooth ambient glow while keeping power consumption low.

Q: Who is this LED strip best suited for?
A: This strip is designed for homeowners, contractors, artists, and store owners who need reliable white accent lighting. High 90+ CRI and UL listing make it suitable for residential remodels, light commercial projects, and display lighting where code compliance and color accuracy matter.

Q: Is the Luma5 LED strip dimmable and what drivers work with it?
A: Yes, the Luma5 LED strip is dimmable when paired with compatible low-voltage controls. It works with HitLights LED dimmable drivers and controllers such as R110 or EZDim, allowing brightness adjustment from subtle night lighting to bright task levels when installed according to manufacturer guidance.

Q: What are the key technical specifications of this LED strip?
A: Each reel is 16.4 ft long, 8 mm wide, and uses 18 LEDs per foot for standard density. The strip runs on 12V DC at about 1.3 W per foot, delivering roughly 132–147 lumens per foot. It offers 3000K, 4000K, or 5000K white light with a 90+ CRI and a 120-degree beam angle.

Q: Can this LED strip be used outdoors or in damp locations?
A: No, this model is rated IP30 and is intended for dry, indoor use only. It should not be installed outdoors, in bathrooms with heavy moisture, or in locations where it may be exposed to water. For those environments, a higher-rated waterproof LED strip is required.

Q: Can I cut and reconnect the Luma5 strip to fit my project?

A: Yes, the strip can be cut at marked points every three LEDs, approximately every 49 mm. After cutting, compatible solderless connectors or soldered joints can be used to create corners or shorter runs. Always maintain correct polarity and connect to an appropriately sized 12V DC power supply.

Q: How long does the strip last, and what warranty is provided?

A: The Luma5 LED strip is rated for up to 60,000 hours of operation when properly installed and cooled. HitLights backs this product with a six-year warranty, offering long-term reliability for fixed installations such as kitchens, display cases, and decorative architectural lighting.