Fantastic lights! Just make sure you picked the right components
Product was delivered fast and as described. Appears to be of quality construction.
Su información de pago se procesa de forma segura. No almacenamos los detalles de la tarjeta de crédito ni tenemos acceso a la información de su tarjeta de crédito.
WHAT STANDS OUT:
- Solderless, tool-free install: insert strip or wire and snap the housing closed for a secure, frustration-free connection.
- Designed for 12mm RGBW tape: sized for 12mm wide multicolor LED strip lights, including many waterproof strips up to IP54.
- Durable terminal block design: polycarbonate shell and copper contacts handle bumps, vibration, and repeated layout changes.
These 12mm 5 Pin RGBW Strip-to-Strip or Strip-to-Wire LED Connectors give a simple way to connect true RGBW LED strip runs without soldering. The terminal block style design uses a snap-close housing that grips both the 12mm RGBW tape and the RGBW conductors, so joins, extensions, and repairs can be done quickly and cleanly on site.
Each connector is built for 12V or 24V RGBW LED tape lighting and supports both non-waterproof and many waterproof strips up to IP54, making it suitable for indoor installs and protected outdoor locations. A transparent housing lets installers visually confirm pad contact and helps reduce dark gaps at the connection, keeping light output consistent across the entire run.
- Constant-voltage rating: 0–36V DC
- Maximum current: 5.5A per connector
- Strip compatibility: 12mm wide RGBW LED strip, PCB thickness 0.25–0.35 mm
- Wire compatibility: 22–20 AWG, with 22 AWG recommended
- Housing: transparent polycarbonate and copper
- IP rating: IP54 – indoor and protected outdoor use
- Connector size: 19.8 × 14.6 × 6.2 mm, 5-pin, 1.95 mm pitch
- Pack size: 12 connectors – all Strip-to-Strip or all Strip-to-Wire, depending on variant selected
- 12 × 12mm 5-Pin RGBW terminal block connectors
- Choose Strip-to-Strip or Strip-to-Wire variant at checkout (12 connectors of the selected style per pack).
Q: What size LED strip lights are compatible with these connectors?
A: These connectors are designed for 12mm wide RGBW LED strip lights. They support common 12V and 24V RGBW tape with PCB thickness between 0.25 mm and 0.35 mm.
Q: Are these connectors suitable for both 12V and 24V systems?
A: Yes. Each connector is rated for 0–36V DC and up to 5.5A, so it works with most 12V and 24V RGBW LED strip lighting runs when used within the strip’s own current limits.
Q: Do I need to solder or use special tools to install them?
A: No soldering is required. Simply insert the 12mm RGBW strip or 22–20 AWG wire into the connector and snap the housing closed for a secure, reliable connection.
Q: Can these connectors be used outdoors?
A: The connectors have an IP54 rating, meaning they are suitable for indoor use and protected outdoor locations where they may encounter splashes or humidity but not direct submersion. Pair them with appropriately rated LED strips.
Q: What wire gauge works best with the strip-to-wire version?
A: The connectors accept 22–20 AWG conductors; 22 AWG stranded wire is recommended for most installations to ensure a firm, consistent clamp.
Q: Can I cut the LED strip and reuse a connector on the new section?
A: Yes. The connector can be reopened and reused on another cut section of 12mm RGBW tape. Always cut the strip on the marked cut lines and verify the copper pads are clean and aligned before snapping it closed.
Q: Is it normal for the connectors to get warm during use?
A: A slight warmth during normal operation is expected and not a concern, as long as current and voltage ratings for both the connectors and the LED strip are not exceeded.
SHIPPING DETAILS:
- Standard Shipping (3-5 Days) - Shipping cutoff 3PM (PST).
- FREE ground shipping (UPS or FedEx) on orders of $199 or more
- Standard Shipping: Flat Rate $9.99 - Cutoff 3PM (PST)
- 2-Day Shipping: Rate Based on Weight - Cutoff 2PM (PST)
- Overnight Shipping: Rate Based on Weight - Cutoff 2PM (PST)
| SKU | Connection Type | Size (L*W*H) | Pin Quantity | Diameter |
| HL007-CON-RGBW-B12C-12PK | Strip-to-Strip | 19.8 x 14.6 x 6.2 mm | 5-pin | 1.95mm |
| HL007-CON-RGBW-X12C-12PK |
Strip-to-Wire |
19.8 x 14.6 x 6.2 mm | 5-pin | 1.95mm |
| CON-RGBW-X12C-6P6N | Strip-to-Wire | 19.8 x 14.6 x 6.2 mm | 5-pin | 1.95mm |
Certifications:
