Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
These 12mm 5 Pin RGBW Strip-to-Strip or Strip-to-Wire LED Connectors give a simple way to connect true RGBW LED strip runs without soldering. The terminal block style design uses a snap-close housing that grips both the 12mm RGBW tape and the RGBW conductors, so joins, extensions, and repairs can be done quickly and cleanly on site.
Each connector is built for 12V or 24V RGBW LED tape lighting and supports both non-waterproof and many waterproof strips up to IP54, making it suitable for indoor installs and protected outdoor locations. A transparent housing lets installers visually confirm pad contact and helps reduce dark gaps at the connection, keeping light output consistent across the entire run.
Q: What size LED strip lights are compatible with these connectors?
A: These connectors are designed for 12mm wide RGBW LED strip lights. They support common 12V and 24V RGBW tape with PCB thickness between 0.25 mm and 0.35 mm.
Q: Are these connectors suitable for both 12V and 24V systems?
A: Yes. Each connector is rated for 0–36V DC and up to 5.5A, so it works with most 12V and 24V RGBW LED strip lighting runs when used within the strip’s own current limits.
Q: Do I need to solder or use special tools to install them?
A: No soldering is required. Simply insert the 12mm RGBW strip or 22–20 AWG wire into the connector and snap the housing closed for a secure, reliable connection.
Q: Can these connectors be used outdoors?
A: The connectors have an IP54 rating, meaning they are suitable for indoor use and protected outdoor locations where they may encounter splashes or humidity but not direct submersion. Pair them with appropriately rated LED strips.
Q: What wire gauge works best with the strip-to-wire version?
A: The connectors accept 22–20 AWG conductors; 22 AWG stranded wire is recommended for most installations to ensure a firm, consistent clamp.
Q: Can I cut the LED strip and reuse a connector on the new section?
A: Yes. The connector can be reopened and reused on another cut section of 12mm RGBW tape. Always cut the strip on the marked cut lines and verify the copper pads are clean and aligned before snapping it closed.
Q: Is it normal for the connectors to get warm during use?
A: A slight warmth during normal operation is expected and not a concern, as long as current and voltage ratings for both the connectors and the LED strip are not exceeded.
SHIPPING DETAILS:
| SKU | Connection Type | Size (L*W*H) | Pin Quantity | Diameter |
|
HL007-CON-RGBW-B12C-12PK |
Strip-to-Strip |
19.8 x 14.6 x 6.2 mm |
5-pin | 1.95mm |
|
HL007-CON-RGBW-X12C-12PK |
Strip-to-Wire | 19.8 x 14.6 x 6.2 mm | 5-pin | 1.95mm |
