Luma20 LED Strip Light High Density 10ft UL Listed IP30 Indoor

The HitLights Premium Luma20 is a 10-foot high density single color LED light strip designed for bright, professional-grade indoor lighting. Powered at 12V DC and built with SMD 2835 LEDs, it delivers consistent, smooth illumination for task, accent, and cove lighting projects.

Engineered in UL-certified facilities, this strip uses higher quality LEDs on a thicker, more durable PCB for long-term reliability. Each 10 ft reel outputs approximately 477 to 507 lumens per foot at 4.6W per foot, with a wide 120° beam angle that reduces hot spots and shadows.

• High density output: 36 LEDs per foot for smooth, continuous light.
• Versatile white options: Available in warm white 3000K, neutral white 4000K, and cool white 5000K color temperatures.
• Indoor rated: IP30 rating for dry, indoor spaces such as kitchens, shelving, and media walls.
• Flexible installation: 10 mm wide, cuttable every 1 inch for custom runs and precise fits.

Unlike many basic LED tape lights, the Premium Luma20 is UL Listed and backed by a six-year warranty and a 50,000-hour rated lifetime (Tc < 140°F), making it suitable for both residential and light commercial projects. It pairs easily with compatible 12V DC power supplies, dimmable drivers, and low-voltage accessories to match specific control needs.

Typical use cases include under-cabinet task lighting, toe-kicks, coves, display cases, and behind-TV bias lighting. The cuttable design and section size of 25 mm (1 inch, 3 LEDs per cut) simplify layout on cabinets, shelves, and tight corners.

For projects that require consistent, bright white light with verified safety certifications, this strip offers a balance of lumen output, efficiency, and flexibility. Add a compatible 12V driver and dimmer to fine-tune brightness and create comfortable, glare-free lighting for work or ambience.

WHAT'S INCLUDED:

• 1 × 10ft Premium Luma20 single color LED light strip (IP30, 12V, high density)
• Pre-applied adhesive backing on the strip (where applicable)
• Basic installation and safety instructions

Q: What is the HitLights Premium Luma20 10ft LED light strip used for?
A: The Premium Luma20 is a 10ft single color LED light strip for bright indoor accent and task lighting. It is commonly installed under cabinets, in coves, behind TVs, and on shelves where smooth, high density illumination is needed for residential or light commercial projects.

Q: Can this LED strip be used outdoors or in damp locations?
A: No. This strip has an IP30 rating and is intended for dry, indoor use only. It should not be installed outdoors, in bathrooms, or in other damp or wet locations. For those environments, a higher IP-rated, weather-resistant strip is required.

Q: Is the Premium Luma20 LED strip dimmable and what dimmer works with it?
A: Yes, the strip is dimmable when used with compatible 12V dimmable drivers or low-voltage dimmers. HitLights recommends using its LED Dimmable Driver or EZDim solutions for smooth dimming and to maintain warranty coverage and performance.

Q: How long is the strip and can it be cut or extended?
A: Each reel is 10 feet long, with 36 LEDs per foot and cut points every 1 inch. The strip can be trimmed at the marked cut lines and connected using appropriate single-color tape light connectors or soldered leads to match custom lengths.

Q: What power supply is required for this 12V LED strip?
A: The Premium Luma20 operates on 12V DC and uses about 4.6 watts per foot. A full 10ft run therefore draws roughly 46 watts, so a 12V power supply rated at 60 watts is typically recommended to provide adequate headroom and reliability.

Q: What are the key specifications of this strip?
A: The strip uses SMD 2835 LEDs, outputs around 477–507 lumens per foot, and offers CCT options of 3000K, 4000K, and 5000K with a 120° beam angle. It is 10mm wide, IP30 rated, UL Listed, and backed by a six-year warranty with a 50,000-hour rated lifetime. 

Q: What warranty and certifications does this LED strip include?
A: This product is UL Listed and manufactured in UL-certified facilities, with a six-year warranty from HitLights. When installed according to guidelines, it is rated for up to 50,000 hours of operation at a case temperature below 140°F.