Name: 12 Volt EZDim® Driver and Dimmer Switch - 60 Watt
Brand: HitLights
SKU: SWX-12V-060-30-U
Price: 143.97 USD
Availability: InStock

HitLights LED Light Strip Controllers and Dimmers 12 Volt EZDim® Driver and Dimmer Switch - 60 Watt

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

EZDim®: Combines an LED dimmer switch and low-voltage LED power supply into a single integrated unit. The EZDim Dimmer + Driver accepts 120 VAC and converts it to low-voltage DC, all within a standard electrical box. With power options up to 100W, it is a true evolutionary step forward for power and control of LED applications.

Preset dimmer with on/off switch
Fits in a standard recessed electrical box
No minimum load
No derating required when ganging units
Power failure memory: If power is interrupted, EZDim will return to the setting before the interruption

SIMPLIFIED INSTALLATION: EZDim® simplifies your installation by combining your dimmable driver and switch in one unit.
ELIMINATES COMPATIBILITY ISSUES: Integrating your LED driver and switch in one is all you need to power up and control your lights.
SUPERIOR LED DIMMING PERFORMANCE: This compact unit allows you to control your light from 100% – 10% dimming.
SHIPPING DETAILS:

Standard Shipping (3-5 Days) - Shipping cutoff 3pm(PST).
FREE ground shipping (UPS or FedEx) on orders of $199 or more.

Input Voltage: 120VAC (108 ~ 132VAC), 50/60Hz (47 ~ 63Hz)
Output Voltage: 12V DC, 60 Watts (5 Amps)
Dimension: 1.4 x 2.1 x 4.1 Inches
Power Factor: >0.9 @ 120VAC 60Hz max load
THD: ≤20% @ 120VAC 60Hz max load. Tested to comply in accordance with IEC 61000-3-2
Stand-by Power: ≤0.5W
Dimming Performance: (100% – 5%)
Protections: Short circuit, thermal runway, and over voltage
Ambient Operating Temp: 0°C to 40°C
IP Rating: IP30 Dry Location
Certifications : FCC, UL Listed, Class 2
Included Face Plates: Glossy White, Glossy Light Almond and Glossy Dark Brown
Connection Type: Hard-Wired
Efficiency: ≥91% @ 120VAC max load
In-Rush Current: Meets NEMA-410 requirement at any nominal input full sine wave voltage and maximum load at 25°C
Leakage Current: <500μA @ 120VAC
Surge/Transient: Tested to meet transients defined in IEC 6100-4-4, level 3 & IEC 6100-4-5, level 3
Dimming: Output voltage is adjustable via sliding lever
Humidity: 8 ~ 90% relative humidity, non-condensing
Warranty: 6 years

SKU	Input	Output	Wattage	Class 2
SWX-12V-040-30-U	120V AC	12V DC	40W	Yes
SWX-12V-060-30-U	120V AC	12V DC	60W	Yes
SWX-24V-060-30-U	120V AC	24V DC	60W	Yes
SWX-24V-100-30-U	120V AC	24V DC	100W	Yes

Certifications:

What is the EZDim® Driver and Dimmer Switch?

The EZDim® is an all-in-one dimmable LED driver and dimmer switch that provides both power and dimming control for low voltage LED lighting. It combines a dimmer switch and LED driver into a single unit that fits into a standard electrical box.

What voltage does the EZDim® output?

The 12V version of the EZDim® outputs 12V DC power to run 12V LED lighting. There is also a 24V version available.

How much power does the 60W, 12V EZDim model provide?

The 60W EZDim® model provides up to 60 watts (5 amps) of 12V DC power to LED lighting. However, it is best to use up to 80% of the driver capacity only for longevity.

What types of faceplates are included in this EZDim?

The EZDim® comes with three interchangeable faceplates in glossy white, light almond, and glossy dark brown to match different decors. A wall plate is not included.

Can I put this be used outdoors?

No, since this is IP30 rated it is for indoor use only.

How long is the warranty?

The warranty of this unit is for 6 years.

Does the EZDim® require a neutral wire?

Yes, the EZDim® requires a neutral connection in addition to line and load wires. It will not work without a neutral.

What size electrical box does the EZDim® fit in?

The warranty of this unit The EZDim® is designed to fit into a single gang electrical box.for 6 years.

It the EZDim® dimmable?

Yes, the EZDim® allows you to dim your LED lighting from 100% down to 10% brightness. It uses PWM (pulse width modulation) dimming optimized for LED loads.

Is the EZDim® UL listed?

Yes, the EZDim® is UL listed and meets safety standards for use in the US and Canada.

DATA SHEET

12 Volt EZDim® Driver and Dimmer Switch - 60 Watt Spec Sheet

CERTIFICATION

UL Listing FKSZ.E476239

12v 60w ezdim

Product is awesome. Been running separate drivers and dimmers for years. Reascently have had compatibility issues. Bought some ezdim driver/dimmers and the are not only an easier install, but work far better then the other products I've used. Plus a great warrenty.

Works Great!

Simple install & works great

Perfect for under cabinet lightling

While remodeling the kitchen, decided to add under cabinet LED light, this dimmer is perfect for this. It doesn't require additional driver and can be installed in a single gang switch box. Pay attention to the wattage of your lights, as this dimmer can handle upto 60W total, so if you have more light you might need the next step up.

12 Volt EZDim® Driver and Dimmer Switch - 60 Watt

Premium Luma5 LED Light Strip, Single Color (UL-Listed) 16.4 Feet - High Density [IP-30]

$39.97

106 reviews

HitLights LED Light Strip Mounting Supplies Surface Mounted Aluminum Mounting Channels (5pack)

Slim Type Surface Mounted Aluminum Mounting Channels (5pack)

$24.75

1 review

8mm Single Color 3528- 6 Inch Any Angle Strip to Strip (12 pack)

$9.97

4 reviews

Delivery was in time

Small size excelent quality

Great Customer Support and Service

I had this dimmable driver installed for my kitchen cabinet led strip lights. The original driver stopped working after about 2 years and I contacted support as this is warrantied for 6 years. Mr. Meden provided exceptional service and support in getting the replacement shipped to me in no time.
Fantastic people. I'm a Happy Customer.

Simplifies the LED tape light installation

These connectors make reliable LED tape light connections and simplify the tape light installation process. If you are installing gel coated tapes, be sure to gently scrape the tape contacts untill they shine. Otherwise, the gel residue acts as an insulator. - (Hitlights Amazon Store)

Warm White (3000K) strip is NOT warm - choose 2700K (“Soft White”) for warm incandescent effect

Beware the somewhat misleading descriptors used for these lights. While the 3000K option is described as “Warm White” and 2700K as “Soft White,” in fact, 3000K to these eyes has nothing to do with warm. It’s a cool, neutral light that reads bluish-white at night. We were looking to replace old “rope lights” from maybe 15 years ago that gave off a truly warm, incandescent glow. After doing some post-installation research, I now see that if you’re looking for a warm incandescent lighting effect, go for 2700K, whatever it’s called by the vendor. Why the warmer, in fact, warmest (2700K) light is called “soft” rather than “warm” and the cooler (3000K) is called “warm” is, frankly, beyond me. Caveat emptor!

Hi JPnyc,

Thank you for your recent purchase from Hitlights. We regret to hear that your purchase did not meet your expectations, and for this, we extend our sincerest apologies. Ensuring the quality of our products is most important to us, and thank you for giving us the opportunity to do better.

Our team reached out and left a voice message to address your concern. Should you need further assistance, please do not hesitate to call us back.

Best regards,
HitLights Team

12 Volt EZDim® Driver and Dimmer Switch - 60 Watt

12 Volt EZDim® Driver and Dimmer Switch - 60 Watt

Customer Reviews

Compatible With

Let customers speak for us