24V COB LED Strip Spotless 32.8ft UL Listed IP20 Indoor

WHAT STANDS OUT:

Spotless COB light delivers a smooth, dot-free beam ideal for visible installations.
Long 24V 32.8ft runs help reduce voltage drop and simplify wiring versus 12V strips.
High CRI 90+ single color with UL listing, 50,000-hour life, and 6-year warranty.

PRODUCT DETAILS:

The HitLights 24V COB LED Strip Light, 32.8ft is a professional-grade single-color LED tape that delivers continuous, spotless illumination along its entire run. Using COB (chip-on-board) flip chip technology, the strip appears as one smooth line of light rather than a row of visible LED dots, making it especially suited for open, eye-level installations.

This 24V DC strip is available in 3000K warm white and 4000K neutral white, with a CRI of 90+ for accurate color rendering in kitchens, retail displays, shelving, coves, and architectural accents. Each 32.8-foot (10 m) reel is 10 mm wide and outputs around 300 lumens per foot, with a power draw of approximately 3.048 watts per foot.

Unlike traditional SMD LED strips, this COB tape packs 36 LEDs per foot into dense segments with cut points every 62.5 mm (2.5 inches), so installers can trim precise lengths while maintaining smooth, uniform brightness. A 180° beam angle floods surfaces evenly, and the strip’s IP20 rating is designed for dry, indoor locations such as under cabinets, display cases, and built-in furniture.

• 24V DC COB flip chip strip, 32.8ft length, 10 mm width
• Single color, 3000K or 4000K, CRI 90+
• Luminous flux ~300 lm/ft, 3.048 W/ft typical load
• Cuttable every 62.5 mm (2.5 in), 16 LEDs per section
• UL listed, IP20 indoor rating, 50,000-hour lifetime and 6-year warranty

The strip is compatible with ELV, TRIAC, 0–10V, DMX, DALI, and RF dimming when paired with appropriate 24V drivers and controls, integrating smoothly into both residential and commercial low-voltage lighting systems. Compared with 12V options, the 24V format enables longer runs with reduced voltage drop, so larger projects can often be wired more efficiently.

This 24V COB strip is well suited to electricians, cabinet makers, and serious DIY users who need clean, reliable linear lighting in a long, UL-listed reel.

WHAT'S INCLUDED:

• 1 × 32.8 ft (10 m) HitLights 24V COB single-color LED strip, 10 mm width
• Pre-applied adhesive backing on the strip for mounting
• Basic installation and safety information (digital or printed, as supplied by HitLights)

Note: 24V DC power supply, dimmable driver, connectors, and mounting channels are sold separately but listed as compatible accessories on the product page.

FREQUENTLY ASKED QUESTIONS:

Q: What is the HitLights 24V COB LED strip light used for?
A: It is a 24V single-color COB LED strip designed for smooth indoor linear lighting over a 32.8-foot run. Typical applications include under-cabinet lighting, retail shelving, coves, display cases, and architectural accents where a continuous, dot-free light line is desired.

Q: Who is this 24V COB strip best suited for?
A: This product targets electricians, cabinet makers, remodelers, and DIY users who need longer 24V runs with professional-grade performance. Its UL listing, CRI 90+ rating, and 50,000-hour lifetime make it suitable for residential, commercial, and retail projects that require dependable, consistent lighting.

Q: How does the 24V COB strip work and how is it powered?
A: The strip uses COB flip chip LEDs mounted on a flexible 24V DC tape that must be connected to a compatible 24V power supply or dimmable driver. It supports dimming via standard protocols such as ELV, TRIAC, 0–10V, DMX, DALI, and RF when paired with appropriate controls, giving wide flexibility in lighting design.

Q: What are the main specifications of this LED strip?
A: The reel is 32.8 feet long, 10 millimeters wide, and delivers around 300 lumens per foot at approximately 3.048 watts per foot. It offers 3000K or 4000K CCT, CRI 90+, a 180-degree beam, IP20 indoor rating, UL listing, a 50,000-hour lifetime, and a 6-year warranty.

Q: Can the 24V COB strip be cut or customized in length?
A: Yes. The strip can be cut at designated marks every 62.5 millimeters, or 2.5 inches, with each cut section containing 16 LEDs. After cutting, segments can be reconnected using compatible 10 mm 2-pin single-color connectors or by soldering according to low-voltage wiring practices.

Q: Is this strip suitable for outdoor or wet locations?
A: No. This model is IP20 rated and intended only for dry, indoor environments. It should not be installed where it will be exposed to water, persistent condensation, or direct weather. For outdoor or damp locations, a higher IP-rated LED strip is required.

Q: What comes in the package and what extra parts are required?
A: The package includes one UL-listed 24V COB LED strip reel with adhesive backing. A compatible 24V DC power supply, optional dimmable driver, solderless connectors, and mounting channels are purchased separately and are shown under the “Compatible With” section of the product page.