Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
These 10mm 4 Pin RGB Strip-to-Strip or Strip-to-Wire LED Connectors provide a simple, solderless way to join multicolor LED strip runs or transition from strip to supply wiring. The snap-close terminal block housing secures both the LED tape and RGB/RGBW wires without special tools, making installs, repairs, and extensions much faster than soldering.
Sized for standard 10mm RGB or RGBW LED tape, the connectors work with both 12V and 24V constant-voltage systems and support many waterproof strips up to IP54, so they fit a wide range of indoor and protected outdoor projects. A transparent polycarbonate body and copper contacts help maintain a reliable electrical connection while minimizing dark gaps at the join.
Q: What size and type of LED strips work with these connectors?
A: These connectors are designed for standard 10mm wide RGB or RGBW LED strip lights. They support common 12V and 24V multicolor tape and are compatible with typical PCB thicknesses between 0.25 mm and 0.35 mm.
Q: Are these connectors compatible with both 12V and 24V systems?
A: Yes. Each connector is rated for constant voltage systems from 0–36V, so it can be used with 12V or 24V RGB / RGBW LED tape, as long as the strip’s own electrical limits are respected.
Q: Do I need to solder or use special tools to install them?
A: No soldering is required. Simply insert the 10mm LED strip and RGB/RGBW wires into the terminals and snap the housing closed for a secure connection. A small screwdriver may be used to tighten terminal screws where applicable, but no specialty tools are required.
Q: Can these connectors be used outdoors or in damp areas?
A: The connectors carry an IP54 rating, meaning they are suitable for indoor use and protected outdoor locations where they may be exposed to splashes or humidity but not direct submersion. Always pair them with appropriately rated LED strips.
Q: How much current can each connector handle?
A: Each connector is rated up to 5.5 amps of current at up to 36V DC. This capacity is adequate for most typical LED strip runs; ensure the connected strip current per run does not exceed this limit.
Q: What wire gauge should I use with the strip-to-wire version?
A: The connector is designed for 22–20 AWG conductors, with 22 AWG stranded wire recommended for a reliable, secure clamp in most installations.
Q: Can I cut the LED strip and reuse the connector on a new section?
A: Yes. The connector can be reopened and reused on another cut section of LED tape. Always cut the strip on the marked cut lines and ensure the copper pads are clean and aligned before snapping the housing closed.
SHIPPING DETAILS:
| SKU | Connection Type |
Size(L*W*H) | Pin Quantity | Pin Distance |
| HL006-CON-RGB-B10C-12PK | Strip-to-Strip | 19.8 x 12.6 x 6.2 mm |
4-pin |
1.95mm |
| HL006-CON-RGB-X10C-12PK | Strip-to-Wire | 19 x 12.6 x 6.2 mm |
4-pin |
1.95mm |
