60W 12V EZDim Pro 2-in-1 Dimmer & Driver Switch - UL

The 12V EZDim Driver and Dimmer Switch 60 Watt is an integrated in-wall LED power supply and dimmer for 12V lighting, including LED strip lights and other low-voltage fixtures. Instead of pairing a separate driver with a compatible wall dimmer, this unit combines both functions in one device that mounts in a standard single-gang electrical box.

The EZDim takes 120VAC line voltage and delivers regulated 12V DC output up to 60 watts (5 amps), providing capacity for longer runs of under-cabinet, cove, accent, and task lighting. By housing the driver and dimmer together, it helps simplify project layout, reduce junction boxes and wiring, and eliminate many driver-to-dimmer compatibility issues that can cause flicker or failures. 

• Integrated 120VAC to 12V DC Class 2 driver with built-in wall dimmer control
• Smooth low-voltage LED dimming from full brightness down to low light levels
• Installs in a standard single-gang recessed electrical box; no derating required when units are ganged
• No minimum load, with short-circuit, over-voltage, and thermal protection built in

Rated for IP30 dry locations, the EZDim 60W operates from 0°C to 40°C and is UL listed and FCC compliant for residential and light commercial applications. Interchangeable glossy white, light almond, and glossy dark brown faceplates are included to coordinate with common interior finishes; the wall plate is selected separately to match existing trim.

This 12V LED driver dimmer switch is well suited for electricians, contractors, remodelers, and advanced DIY users who want a clean, code-friendly way to power and dim low-voltage LED strips from a single in-wall control point. A 6-year warranty supports long-term installations and repeat use in professional projects.

WHAT'S INCLUDED:

• 1 × HitLights EZDim 12V 60W in-wall dimmer driver switch

Q: What is the 12V EZDim 60W driver and dimmer switch?
A: It is an all-in-one dimmable LED driver and wall dimmer that provides both power and control for low-voltage 12V LED lighting. The unit fits in a standard recessed electrical box and replaces a separate driver and compatible dimmer with a single integrated device.

Q: Who is this 60W EZDim model best suited for?
A: The 60W EZDim is suited for electricians, contractors, cabinet makers, and advanced DIY users installing 12V LED strip lights or other low-voltage runs. It works well in kitchens, display cases, coves, and accent lighting where a clean in-wall power and dimming solution is preferred.

Q: How does the EZDim 60W work and how is it installed?
A: The device wires to 120VAC line, neutral, and load inside a standard single-gang box, then outputs regulated 12V DC to the LED lighting. A preset dimmer with on/off switch and sliding lever controls brightness, while internal electronics convert AC to DC and provide LED-optimized dimming.

Q: What are the main electrical specifications of the 60W model?
A: The 12V EZDim outputs 12V DC up to 60W (5A) from a 120VAC, 50/60Hz input, with efficiency ≥91 percent and power factor >0.9. It is Class 2, IP30 dry-location rated, and includes short-circuit, thermal, and over-voltage protection to help safeguard connected LED loads.

Q: How is this different from using a separate LED driver and dimmer?
A: Traditional installs use a remote low-voltage driver plus a separate wall dimmer, which adds wiring complexity and potential compatibility issues. The EZDim 60W integrates the driver and dimmer into one unit, reducing components, simplifying troubleshooting, and creating a cleaner, code-friendly installation.

Q: What faceplates and finishes are included with the EZDim 60W?
A: Each 60W EZDim includes three interchangeable faceplates in glossy white, glossy light almond, and glossy dark brown. A wall plate is not included, allowing installers to match existing wall plate styles and brands already used on the project.

Q: Are there usage limits or conditions to protect the driver long term?
A: The 60W model can supply up to 60 watts of 12V DC power, or 5 amps, to LED loads. For longevity, installations are typically designed at up to about 80 percent of maximum capacity, and the unit should be used only in dry, indoor locations within its rated temperature range. 

SHIPPING DETAILS:

• Standard Shipping (3-5 Days) - Shipping cutoff 3pm (PST).
• FREE ground shipping (UPS or FedEx) on orders of $199 or more
• Standard Shipping: Flat Rate $9.99 - Cutoff 3PM (PST)
• 2-Day Shipping: Rate Based on Weight - Cutoff 2PM (PST)
• Overnight Shipping: Rate Based on Weight - Cutoff 2PM (PST)