The HitLights 24V DC Power Supply 96W is a UL Listed plug-in adapter designed to safely power 24-volt LED strip lights and other low-voltage electronics.
Delivering up to 96 watts at 24V DC (4A), this compact Class 2 supply converts 110–240V AC mains power into stable low-voltage output for lighting projects, CCTV cameras, routers, mini amplifiers, and other 24V devices. It plugs into a standard North American NEMA 1 wall outlet and connects via a 5.5 x 2.1 mm DC jack for simple, tool-free installation.
- 24V DC, 96W (4A) output for single runs of 24V LED strip lights and controllers.
- UL Listed with short-circuit, over-current, over-voltage, and over-temperature protection.
- Plug-and-play wall adapter with DC jack, no electrician or wiring required.
- Indoor-rated IP30 enclosure with compact 5 x 2 x 1.3 inch housing and 3.94 ft DC lead plus 4.92 ft AC cord.
Unlike open-frame or hardwired drivers, this non-dimmable plug-in power supply installs in seconds and is easy to move or replace without tools. When paired with compatible 24V PWM dimmers or RGB/RGBW controllers, it supports smooth brightness control and color-changing effects for accent, task, and display lighting.
This 24V LED strip power supply is ideal for homeowners, DIY makers, integrators, and lighting professionals who need a reliable, safety-certified adapter for under-cabinet lighting, cove lighting, retail displays, office accents, and small commercial runs. Backed by a 3-year HitLights warranty, it provides a dependable low-voltage power source for long-term indoor installations.
WHAT'S INCLUDED:
Q: What is the HitLights 24V 96W power supply used for?
A: It is a 24V DC, 96W plug-in power adapter for low-voltage devices. Typical uses include 24V LED strip lights, LED controllers, CCTV cameras, mini amplifiers, routers, and other 24V DC electronics that draw up to 4 amps.
Q: Who is this 24V DC power supply designed for?
A: It suits homeowners, DIY users, installers, and lighting professionals needing a reliable Class 2 adapter for indoor 24V lighting and low-voltage equipment. Its plug-and-play design removes the need for wiring skills, making it practical for quick upgrades and small commercial or office projects.
Q: How do I install and use this power supply?
A: Plug the NEMA 1 AC cord into a 110–240V wall outlet, then connect the 5.5 x 2.1 mm DC jack to the 24V LED strip or device. No splicing or tools are required, as the supply is pre-wired and non-dimmable on its own; dimming is handled by compatible 24V PWM dimmers or controllers placed between the supply and the load.
Q: What are the electrical specifications and dimensions?
A: Input is 110–240V AC, 50/60 Hz, and output is 24V DC at up to 96W (4A). The housing measures approximately 127 × 50.8 × 33 mm (5 × 2 × 1.3 inches) with a 3.94 ft DC lead and 4.92 ft AC power cord, suitable for compact indoor installations.
Q: Is this power supply compatible with RGB or RGBW LED strips and other devices?
A: Yes, it can power any 24V RGB or RGBW strip when used with an appropriate RGB/RGBW controller. It also works with 24V single-color strips, dimmers, and many other 24V DC devices, provided the total load does not exceed 96W and the device accepts a 5.5 x 2.1 mm DC jack.
Q: Can this 24V 96W supply be used outdoors?
A: No, this adapter is rated IP30 for indoor use only. It should be mounted in a dry, ventilated location away from moisture and direct heat. For outdoor lighting, a weather-rated power supply with appropriate enclosure and IP rating is required.
Q: What protections and warranty does it include?
A: The unit includes short-circuit, over-current, over-voltage, and over-temperature protection for safer operation. It is UL Listed for safety compliance and comes with a three-year HitLights warranty for added peace of mind in residential and commercial projects.
