Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
This HitLights double-sided mounting tape is a heavy-duty, thin adhesive tape designed for long, continuous runs on LED strip installs, car trim, home décor, and general mounting projects. The 164 ft (50 m) roll with a 10 mm (≈0.39 in) width provides extensive coverage, making it ideal for contractors, DIYers, and shops that need one roll to handle multiple jobs.
Unlike thick foam tapes, this version uses a slim, approximately 0.01 in (0.25 mm) adhesive layer that lies flat behind strips, posters, and trim pieces for a discreet finish. The thin, white construction is easy to hide, so installs look clean and professional without visible tape edges.
The adhesive is formulated for heavy-duty use, with published strength up to about 2.2 lb per square inch on suitable surfaces. That makes it useful for securing LED strip lights, craft projects, teaching materials, posters, picture frames, and light trim when mechanical fasteners are not desired. At the same time, it is marketed as removable and traceless, leaving minimal to no residue when peeled correctly from many smooth surfaces.
This tape is waterproof and rated for general indoor and outdoor use on smooth substrates. It is designed to resist curling, stay flexible during handling, and cut cleanly to length. These characteristics make it especially practical for long runs along walls, ceilings, cabinets, and vehicle interiors where installers need fast, repeatable results.
WHAT'S INCLUDED:
1 × HitLights double-sided mounting tape, 164 ft (50 m) length, 10 mm (0.39 in) width, ~0.01 in thickness
Q: What is this 164 ft double-sided tape used for?
A: This tape is a heavy-duty, thin double-sided mounting tape for attaching LED strip lights, car trim, posters, teaching materials, picture frames, and general décor items. It is designed as a multipurpose solution for smooth surfaces in homes, offices, classrooms, and vehicles.
Q: How strong is the adhesive on this tape?
A: The tape is rated to hold up to about 2.2 pounds per square inch on suitable, smooth surfaces. For best performance, apply to clean, dry substrates, use sufficient tape coverage for the weight of the item, and press firmly to ensure full contact along the entire tape length.
Q: Is this tape removable, or is it permanent like foam VHB tape?
A: This model is marketed as removable and traceless, meaning it can often be peeled away without damaging most smooth surfaces or leaving heavy residue when removed correctly. It is intended as a strong yet removable option, unlike fully permanent high-density foam tapes.
Q: Can the tape be used outdoors or in humid environments?
A: Yes. The tape is described as waterproof and suitable for indoor and outdoor use on smooth surfaces. It can be used in locations such as vehicle interiors, covered outdoor areas, and other environments where occasional moisture or humidity is present, provided the surface is properly prepared.
Q: How thick is the tape, and will it fit under LED channels or trims?
A: The tape is approximately 0.01 inch thick, which is much thinner than standard foam mounting tapes. This slim profile helps it fit under LED strips, trims, and other low-clearance components where a discreet, low-profile bond is required.
Q: What surfaces work best with this tape?
A: The tape performs best on smooth, clean, and dry surfaces such as painted walls, metals, plastics, glass, finished wood, and sealed materials. Rough, dusty, or porous substrates should be cleaned, sealed, or smoothed before application to maximize adhesion and removability.
Q: How do I remove the tape without damaging the surface?
A: To remove, slowly peel the tape back at a low angle. If needed, gently warm the tape with a hair dryer or heat gun on a low setting to soften the adhesive, then continue peeling. Any light residue can typically be cleaned with a surface-safe adhesive remover appropriate for the material.
SHIPPING DETAILS:
| SKU | Color | Width | Length | Waterproof |
| MNT-FT10MM-10FT | Black | 0.39 inches (9.9mm) | 10 feet (3m) | Yes |
| MNT-FT24MM-16FT-S | Black | 0.94 inches (24mm) | 16 feet (4.87m) | Yes |
| MNT-FT24MM-16FT | Black | 0.94 inches (24mm) | 16 feet (4.87m) | Yes |
| MNT-FT10MM-164FT | White | 0.39 inches (9.9mm) | 164 feet (50m) | Yes |
| MNT-FT24MM-16FT-08T | Transparent | 0.94 inches (24mm) | 16 feet (4.87m) | Yes |
| MNT-FT10MM-32FT-S | Black | 0.94 inches (24mm) | 16 feet (4.87m) | Yes |
| MNT-FT10MM-100FT | Black | 0.39 inches (9.9mm) | 100 feet (30.48m) | Yes |
| MNT-FT10MM-32FT | Black | 0.39 inches (9.9mm) | 32 feet (9.8m) | Yes |
| MNT-FT10MM-32FT-3PK | Black | 0.39 inches (9.9mm) | 32 feet (9.8m) | Yes |
| HL-MNT-FT13MM-50FT | Black | 0.5 inches (12.7mm) | 50 feet (15.2m) | Yes |
