Name: 12 Volt EZDim® Driver and Dimmer Switch - 40 Watt
Brand: HitLights
SKU: SWX-12V-040-30-U
Price: 149.49 USD
Availability: InStock

HitLights LED Light Strip Controllers and Dimmers 12 Volt EZDim® Driver and Dimmer Switch - 40 Watt

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

EZDim®: Combines an LED dimmer switch and low-voltage LED power supply into a single integrated unit. The EZDim Dimmer + Driver accepts 120 VAC and converts it to low-voltage DC, all within a standard electrical box. With power options up to 100W, it is a true evolutionary step forward for power and control of LED applications.

Preset dimmer with on/off switch
Fits in a standard recessed electrical box
No minimum load
No derating required when ganging units
Power failure memory: If power is interrupted, EZDim will return to the setting before the interruption

SIMPLIFIED INSTALLATION: EZDim® simplifies your installation by combining your dimmable driver and switch in one unit.
ELIMINATES COMPATIBILITY ISSUES: Integrating your LED driver and switch in one is all you need to power up and control your lights.
SUPERIOR LED DIMMING PERFORMANCE: This compact unit allows you to control your light from 100% – 10% dimming.
SHIPPING DETAILS:

Standard Shipping (3-5 Days) - Shipping cutoff 3pm(PST).
FREE ground shipping (UPS or FedEx) on orders of $199 or more.

Input Voltage: 120VAC (108 ~ 132VAC), 50/60Hz (47 ~ 63Hz)
Output Voltage: 12V DC, 40 Watts (3.3 Amps)
Dimension: 1.4 x 2.1 x 4.1 Inches
Power Factor: >0.9 @ 120VAC 60Hz max load.
THD: ≤20% @ 120VAC 60Hz max load. Tested to comply in accordance with IEC 61000-3-2
Stand-by Power: ≤0.5W
Dimming Performance: (100% – 5%)
Protections: Short circuit, thermal runway, and over voltage
Ambient Operating Temp: 0°C to 40°C
IP Rating: IP30 Dry Location
Certifications : FCC, UL Listed, Class 2
Included Face Plates: Glossy White, Glossy Light Almond and Glossy Dark Brown
Connection Type: Hard-Wired
Efficiency: ≥91% @ 120VAC max load
In-Rush Current: Meets NEMA-410 requirement at any nominal input full sine wave voltage and maximum load at 25°C
Leakage Current: <500μA @ 120VAC
Surge/Transient: Tested to meet transients defined in IEC 6100-4-4, level 3 & IEC 6100-4-5, level 3
Dimming: Output voltage is adjustable via sliding lever
Humidity: 8 ~ 90% relative humidity, non-condensing
Warranty: 6 years

SKU	Input	Output	Wattage	Class 2
SWX-12V-040-30-U	120V AC	12V DC	40W	Yes
SWX-12V-060-30-U	120V AC	12V DC	60W	Yes
SWX-24V-060-30-U	120V AC	24V DC	60W	Yes
SWX-24V-100-30-U	120V AC	24V DC	100W	Yes

Certifications:

What is the EZDim® Driver and Dimmer Switch?

The EZDim® is an all-in-one dimmable LED driver and dimmer switch that provides both power and dimming control for low voltage LED lighting. It combines a dimmer switch and LED driver into a single unit that fits into a standard electrical box.

What voltage does the EZDim® output?

The 12V version of the EZDim® outputs 12V DC power to run 12V LED lighting. There is also a 24V version available.

How much power does the 40W model provide?

The 40W EZDim® model provides up to 40 watts (3.3 amps) of 12V DC power to LED lighting. However, it is best to use up to 80% of the driver capacity only for longevity.

What types of faceplates are included in this EZDim?

The EZDim® comes with three interchangeable faceplates in glossy white, light almond, and glossy dark brown to match different decors. A wall plate is not included.

Can I put this be used outdoors?

No, since this is IP30 rated it is for indoor use only.

How long is the warranty?

The warranty of this unit is for 6 years.

What size electrical box does the EZDim® fit in?

The warranty of this unit The EZDim® is designed to fit into a single gang electrical box.for 6 years.

Does the EZDim® require a neutral wire?

Yes, the EZDim® requires a neutral connection in addition to line and load wires. It will not work without a neutral.

It the EZDim® dimmable?

Yes, the EZDim® allows you to dim your LED lighting from 100% down to 10% brightness. It uses PWM (pulse width modulation) dimming optimized for LED loads.

Is the EZDim® UL listed?

Yes, the EZDim® is UL listed and meets safety standards for use in the US and Canada.

DATA SHEET

12 Volt EZDim® Driver and Dimmer Switch - 40 Watt Spec Sheet

CERTIFICATION

UL Listing FKSZ.E476239

Great product!

I have used several of these devices.
Love how easy the install is .
No additional equipment needed, just your light strip and this driver.
Great Co. to work with!
Thanks!

Great Service Easy Install

We installed the single color 12 volt digital strip light under counter. The dimmer/driver made the power supply really easy. Soldering the 18ga wires to the connector was tedious but did work. Under cabinet install went well and the tape holds nicely. Very satisfied with our new Hitlights.

DIM/DRIVER/DONE

It only makes sense to buy one component and not have to worry about mounting a driver elsewhere and running additional wires. I haven't had a chance to hook this up yet as I'm still in the process of my build. But I have bough HIT products before and loved them, hence may coming back to buy more... Thanks for putting out a great product, Patrick

Much better then traditional method

Really easy to install, works great. Way better than getting an external transformer and trying to find the right place to hide it.

Works well

Installed this in a gang box instead of LED driver plus switch. Dimmer button could be designed prettier. A bit pricey but worth the cost.

1 2

Premium Luma5 LED Light Strip, Single Color (UL-Listed) 16.4 Feet- Standard Density [IP-30]

From $32.97

15 reviews

Installation: Cuttable and easy install with DC jack
Recommend For: 12V dimmable/non-dimmable power supplies
Max Run: 16.4ft-32.8ft. Use parallel for longer installs.

HitLights LED Light Strip Mounting Supplies Surface Mounted Aluminum Mounting Channels (5pack)

Slim Type Surface Mounted Aluminum Mounting Channels (5pack)

$24.75

1 review

6 Inch Any Angle 8mm Solderless LED Light Strip Connector : Single Color (4 Pack)

$5.97

11 reviews

Great Customer Support and Service

I had this dimmable driver installed for my kitchen cabinet led strip lights. The original driver stopped working after about 2 years and I contacted support as this is warrantied for 6 years. Mr. Meden provided exceptional service and support in getting the replacement shipped to me in no time.
Fantastic people. I'm a Happy Customer.

Simplifies the LED tape light installation

These connectors make reliable LED tape light connections and simplify the tape light installation process. If you are installing gel coated tapes, be sure to gently scrape the tape contacts untill they shine. Otherwise, the gel residue acts as an insulator. - (Hitlights Amazon Store)

Warm White (3000K) strip is NOT warm - choose 2700K (“Soft White”) for warm incandescent effect

Beware the somewhat misleading descriptors used for these lights. While the 3000K option is described as “Warm White” and 2700K as “Soft White,” in fact, 3000K to these eyes has nothing to do with warm. It’s a cool, neutral light that reads bluish-white at night. We were looking to replace old “rope lights” from maybe 15 years ago that gave off a truly warm, incandescent glow. After doing some post-installation research, I now see that if you’re looking for a warm incandescent lighting effect, go for 2700K, whatever it’s called by the vendor. Why the warmer, in fact, warmest (2700K) light is called “soft” rather than “warm” and the cooler (3000K) is called “warm” is, frankly, beyond me. Caveat emptor!

Hi JPnyc,

Thank you for your recent purchase from Hitlights. We regret to hear that your purchase did not meet your expectations, and for this, we extend our sincerest apologies. Ensuring the quality of our products is most important to us, and thank you for giving us the opportunity to do better.

Our team reached out and left a voice message to address your concern. Should you need further assistance, please do not hesitate to call us back.

Best regards,
HitLights Team

Quick fix

Works perfect. Was going to buy new led lights when the contractor came loose. Took 2 minutes to attach and works great - (Hitlights Amazon Store)

Worked as they should

Worked as advertised no issues - (Amazon HitLights Review)

12 Volt EZDim® Driver and Dimmer Switch - 40 Watt

12 Volt EZDim® Driver and Dimmer Switch - 40 Watt

Customer Reviews

Compatible With

Let customers speak for us