150 Watt HLG-Series Mean Well Outdoor Power Supply - 24 Volt

This 150W 24V LED power supply is an outdoor-rated constant-voltage / constant-current driver built around the Mean Well HLG-150H-24A, tailored by HitLights for 24V LED strip lighting and other low-voltage applications. It delivers a regulated 24V DC output up to approximately 6.25A (about 150W), allowing longer 24V LED strip runs or multiple devices on a single power supply.

A fully sealed IP67 metal housing protects the driver against dust and water exposure, making it suitable for outdoor, damp, or dusty locations without a separate enclosure. This makes it a strong choice for landscape lighting, architectural accents, and illuminated signage where reliability in harsh conditions matters.

The unit operates from a wide 90–305V AC input at 47–63Hz, covering common residential and commercial mains systems. Power factor is rated at 0.92 at 277V AC, and the driver incorporates active power factor correction and controlled inrush and leakage currents for professional installations. Built-in protection circuits guard against short circuit, overcurrent, overvoltage, and over-temperature events.

• Output: 24V DC, up to 6.25A (150W)
• Ingress Protection: IP67 outdoor-rated metal housing
• Operating Conditions: -40°C to +90°C case temperature, 20–95% non-condensing humidity
• Dimensions: 8.98 × 2.68 × 1.53 in (228 × 68 × 38.8 mm)

Unlike generic open-frame supplies, this power supply uses a rugged sealed housing and wide environmental ratings to minimize failures and maintenance in real-world outdoor conditions. It is compatible with single-color or RGB/RGBW 24V LED strip lights when paired with an appropriate low-voltage controller, and dimming is handled on the 24V side via compatible controllers rather than via traditional wall dimmers. HitLights supports the unit with a 2-year warranty and clear wiring guidance for installers. 

WHAT'S INCLUDED:

• 1 × 150W 24V HLG-Series Mean Well Outdoor LED Power Supply

Q: What is the HitLights Mean Well 24V 150W IP67 LED power supply used for?
A: It is a 24V, 150W constant-voltage LED power supply designed to run 24V LED strip lights, LED controllers, and other 24V DC devices such as CCTV cameras or mini amplifiers. Installers commonly use it in landscape lighting, architectural accents, and illuminated signage that require a reliable 24V bus.

Q: Who is this 24V power supply intended for?
A: This driver targets electricians, lighting contractors, sign fabricators, and advanced DIY users who need a documented, UL-listed 24V source. Its wide 90–305V input range and environmental ratings make it suitable for both residential and commercial projects where dependable, long-term outdoor performance is important.

Q: How does the HLG-150H-24A power supply work in a 24V LED system?
A: The power supply converts 90–305V AC mains into a regulated 24V DC output up to about 6.25A. It feeds 24V LED strips or other devices directly, or powers a low-voltage LED controller for dimming and effects. Protection circuits continuously monitor for faults such as short circuits or overloads.

Q: What are the main electrical and mechanical specifications?
A: This unit delivers 24V DC at up to approximately 6.25A (≈150W) with a 90–305V AC input and power factor around 0.92 at 277V AC. The IP67 metal housing measures roughly 8.98 × 2.68 × 1.53 inches (228 × 68 × 38.8 mm) and operates from -40°C to +90°C case temperature.

Q: Is this 24V power supply dimmable?
A: The power supply is not dimmed directly with standard wall dimmers, but it works with low-voltage LED controllers on the 24V side for dimming. HitLights recommends pairing it with compatible 24V controllers and remotes to adjust brightness or color on single-color and RGB/RGBW LED strips.

Q: Can this power supply be used outdoors?
A: Yes. The IP67 rating means the metal housing is dust-tight and protected against temporary immersion, making it suitable for outdoor and damp locations. It also supports 20–95% non-condensing humidity and a -40°C to +90°C working temperature, covering most climate conditions encountered in field installations.

Q: What warranty and certifications does it include?
A: HitLights provides a 2-year warranty on this power supply, and the model is UL listed for safety. The design incorporates protections for short circuit, overcurrent, overvoltage, and over-temperature faults, helping safeguard connected loads and upstream circuits in professional lighting systems. 

SHIPPING DETAILS:

• Standard Shipping (3-5 Days) - Shipping cutoff 3pm (PST).
• FREE ground shipping (UPS or FedEx) on orders of $199 or more
• Standard Shipping: Flat Rate $9.99 - Cutoff 3PM (PST)
• 2-Day Shipping: Rate Based on Weight - Cutoff 2PM (PST)
• Overnight Shipping: Rate Based on Weight - Cutoff 2PM (PST)